701 found, showing page 3 of 18
$3.29
1/2" RIGID OFFSET
Rigid offset nipple, pressure cast. 1 each. UPC coded. UL listed.
View Details
$12.79
5 PK 1/2" CONDUIT CLAMP
Noncorrosive PVC conduit strap for masonry applications. Makes installation of pipe, conduit, and electrical cable on concrete and masonry block faster and easier by eliminating the use of bolts and anchors. Designed to push into a 5/16" drill hole. 5 per bag.
View Details
$3.39
*1/2" WATERTITE CONNECTOR
Watertight connector for underground feeder cable. Pressure cast. 1 each. UPC coded. UL listed.
View Details
$174.99
500' 10SOL BLK THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$8.79
3/4" RIGID CONDUIT BODY C
Threaded oval conduit body for rigid conduit. Pressure cast, cover and gasket assembled. UPC coded. 1 each. UL listed.
View Details
$9.29
1/2" LL RGD CONDUIT BODY
Threaded oval conduit body for rigid conduit. Pressure cast, cover and gasket assembled. UPC coded. 1 each. UL listed.
View Details
$9.29
3/4" LR CONDUIT BODY
Threaded oval conduit body for rigid conduit. Pressure cast, cover and gasket assembled. UPC coded. 1 each. UL listed.
View Details
$9.29
1/2" RIGID CONDUIT BODY C
Threaded oval conduit body for rigid conduit. Pressure cast, cover and gasket assembled. UPC coded. 1 each. UL listed.
View Details
$9.29
3/4" LL RGD CONDUIT BODY
Threaded oval conduit body for rigid conduit. Pressure cast, cover and gasket assembled. UPC coded. 1 each. UL listed.
View Details
$11.99
OUTDOOR BOX EXTENTION*******
Single gang electrical box extension adapter. 1-1/2 inches deep with 6 outlets, 1/2-inch NPT (National Pipe Thread). Made of corrosion resistant aluminum, finished with a protective color coating. For wet locations. Individually shrink wrapped. Gray. UL (Underwriter's Laboratories) listed.
View Details
$10.49
1G GR WP VERT GFCI COVER
Weatherproof GFCI (ground fault circuit interrupter) cover. Constructed of durable die-cast metal featuring powder coat finish which provides maximum weather and scratch resistance. Self closing lid assures weatherproof protection when receptacle is not in use. Includes gasket, mounting hardware, and multi-lingual instructions. NEMA (National Electrical Manufacturers Association) 3R rated.
View Details
14STR-BLK THHN WIRE 500'
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$21.99
1G WP IN-USE DEEP COVER
Weatherproof deep outdoor outlet cover. 16-in-1 configurations. Constructed of high-impact polycarbonate for maximum durability. Features patented Quick-Fit keyhole mounting system for installation in under a minute. Pre-configured for GFCI (ground fault circuit interrupter) with patented Knock-Out technology for alternate devices. 4-3/4 inches deep. Includes gasket, mounting hardware, EZ-Change pin for horizontal or vertical mount, and lockable tab. NEMA (National Electrical Manufacturers Association) 3R rated.
View Details
$12.79
2GANG GRAY OUTDOOR COVER
2 gang device vertical mount cover for 2 single receptacles, 1.406" diameter. Made of corrosion-resistant aluminum, finished with a protective color coating. For wet locations, closure plugs and ground screw included. Individually shrink wrapped. Gray. UL listed.
View Details
$319.99
10/2 UFB WIRE 250'
Type UF-B cable is designed specifically for use as underground feeder cable for direct earth burial in branch circuits, and indoors for wet or corrosive locations. Highly resistant to acids, alkalis, corrosive fumes, chemicals, lubricants, and ground water. It is noncorroding, sunlight-resistant, and will not support combustion. UL (Underwriter's Laboratories) listed.
View Details
$32.99
2G GY WP 1POLE 15A COVER
Durable die-cast construction, weatherproof switch and outlet cover. Features powder coat finish for weather and scratch resistance. Includes gasket, mounting hardware, toggle single pole 15-amp switch, duplex receptacle, and multi-lingual instructions. Dimensions: 4.531 In. W. x 4.531 In. H. x 0.797 In D. NEMA (National Electrical Manufacturers Association) 3R rated.
View Details
$9.99
GRAY WP RECPTCLE COVER
Device-mounted vertical cover for single receptacle, 1.406-inch diameter. Constructed of die-cast metal featuring a powder coat for weather and scratch resistance. For wet locations. Includes gasket, mounting hardware, and multi-lingual instrucitons. UL (Underwriter's Laboratories) listed. NEMA (National Electrical Manufacturers Association) 3R rated.
View Details
$4.59
1/2 IN GY CLOSURE PLUG
1/2-inch weatherproof closure plugs for outdoor box covers. Compatible with 1/2-inch threaded outlets.
View Details
$11.99
WP RD CVR & LAMPHOLDER
Single lampholder with cover. Features 180-degree adjustable head with positive locking, threaded for 1/2-inch outlet, 6-inch wire leads, and porcelain socket. Constructed of die-cast metal with powder coat finish to provide maximum weather resistance and scratch resistance. Includes gasket, mounting hardware, and multi-lingual instructions. Uses up to (1) 150W PAR38 floodlight bulb, 120V. For wet locations. UL (Underwriter's Laboratories) listed.
View Details
$9.69
GY WP FLIP 16-1 COVER
Weatherproof flip cover for outdoor electrical boxes. Constructed of high-impact polycarbonate for maximum durability. Features patented Quick-Fit keyhole mounting system for installation in under a minute. Pre-configured for GFCI (ground fault circuit interrupter) with patented Knock-Out technology for custom fitting. Includes lockable tab, gasket, and mounting hardware.
View Details
$3.89
1G GY WP PLST BL COVER
Blank outdoor box cover. Ideal for general use when weatherproof protection is needed. Constructed of durable, high impact polycarbonate. Includes attached gasket and mounting hardware. NEMA (National Electrical Manufacturers Association) 3R rated.
View Details
100' 1/2" FLEX CONDUIT
Reduced wall flexible aluminum conduit. Maintains all the strength and durability of steel, but is 2/3 lighter in weight. Designed to meet industry specifications for use with standard conduit connectors and device boxes. Meets UL (Underwriter's Laboratories) Standard 1, NEC Article 350, and Federal Specification WW-C 566C.
View Details
$16.49
2" RIGID OFFSET
Rigid offset nipple, pressure cast. 1 each. UPC coded. UL listed.
View Details
500' 14STR WHT THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Stranded copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$2.39
15PK 1/2" CABLE STAPLE
Made from high-grade injection molded plastic with high-dielectric strength. Smooth saddle prevents damage to insulation. Tested for a maximum 70-pound pull. 15 per card.
View Details
$5.79
1G GRY HRZ GFCI WP COVER
1G GRY HRZ GFCI WP COVER
View Details
$4.99
1/2" 3-HLE 1G GRY WP BOX
1/2" 3-HLE 1G GRY WP BOX
View Details
$3.99
3-1/2 X 1-1/2 DP OCT BOX
Steel, octagon, electrical box. Ideal to house lightweight fixtures or safety devices in ceilings. UL (Underwriter's Laboratories) listed.
View Details
$7.19
*COVR RND OUTDR GY
Round cluster cover for use with lampholders. (1) 1/2-inch threaded outlet. Made of corrosion resistant zinc, finished with a protective color coating. For wet locations, gaskets and screws included. Carded. Gray. UL (Underwriter's Laboratories) listed.
View Details
$7.39
1/2" INSULATED STAPLE
Cable staple ideal for use with all 2-wire UF, non-metallic, and BX cable. 1/2-inch unbreakable clear poly construction, will not bruise wires.
View Details
$77.99
14SOL-RED THHN WIRE 500'
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$99.99
500' 12SOL RED THHN WIRE
90 degrees Celsius, small diameter, general-purpose, 600 volt building wire to be used as power, lighting, and control wiring. Suitable for use in conduit and raceways. Solid copper with flame-retardant PVC (polyvinyl chloride) insulation and nylon jacket. Resistant to oil, gasoline, chemicals, and abrasion. UL (Underwriter's Laboratories) listed.
View Details
$1.99
3-1/2" OCTAGON COVER 1/2KO
Steel metallic round cover with a 1/2 In. knockout in its center. It is designed to house and protect electrical wiring, switches, and receptacles. It conveniently closes 3-1/2 In. octagon boxes when used as junction boxes. Additionally, this cover is UL listed for safety.
View Details
$6.29
2" BOX CONNECTOR
Clamp type. Die-cast body. UPC coded. UL listed.
View Details
$7.29
3/4" INSULATED STAPLE
Cable staple ideal for use with 3-wire UF, non-metallic, and BX cable. 3/4-inch unbreakable clear poly construction.
View Details
$5.99
1G WHT HRZ GFCI WP COVER
1G WHT HRZ GFCI WP COVER
View Details
$29.99
1/2" EMT CONDUIT BENDER
Big Ben aluminum hand bender. Features include built-in sight-lines for bending on the floor, conduit bend back channel easily corrects over bends, Vise-Mate conduit vise holds conduit while cutting or reaming, and Benfield style angle markings for bending in the air. Limited lifetime warranty.
View Details
$52.99
3/4" EMT CONDUIT BENDER
Big Ben aluminum hand bender. Features include built-in sight-lines for bending on the floor, conduit bend back channel easily corrects over bends, Vise-Mate conduit vise holds conduit while cutting or reaming, and Benfield style angle markings for bending in the air. Limited lifetime warranty.
View Details
$5.39
1-1/2" BOX CONNECTOR*****
Clamp type. Die-cast body. UPC coded. UL listed.
View Details
